Orthogonal frequency division modulation: Meaning (information, definition, explanation, facts)

Orthogonal frequency division modulation (OFDM, also called orthogonal frequency division multiplexing) is a technique for the modulation of digital information onto an analog carrier electromagnetic (e.g. radio) signal. OFDM is sometimes called discrete multitone modulation (DMT). OFDM is the modulation method used in the IEEE 802.11a/g WLAN standard.

Characteristics

An OFDM baseband signal is the sum of a number of orthogonal sub-carriers, each sub-carrier being independently modulated (for instance using some type of QAM or PSK) by its own data. This composite baseband signal is typically used to modulate a main RF carrier.

The benefits of using OFDM are that it is easy to filter out noise (if a particular range of frequencies suffers from interference, the carriers within that range can be disabled or made to run slower), and that the upstream and downstream speeds can be varied by allocating either more or fewer carriers for each purpose. Some forms of Rate Adaptive DSL use this feature in real time, so that bandwidth is allocated to whichever stream needs it most.

OFDM modulation and demodulation are typically (as of 2001) implemented using digital filter banks generally using the Fast Fourier Transform(FFT).

When OFDM is used in conjunction with channel coding techniques, it is described as coded orthogonal frequency division modulation (COFDM). As the overhead of doing this in an already digital system is low, and the gains substantial, practical OFDM/DMT systems are all actually COFDM.

Although highly complex, COFDM has high performance under even very challenging channel conditions.

By combining the OFDM technique with error-correcting codes, adaptive equalization and reconfigurable modulation, COFDM has the following properties:

• resistant against link dispersion
• resistant against slowly changing phase distortion and fading
• resistant against frequency response nulls and constant frequency interference
• resistant against burst noise

COFDM also generally has a nearly 'white' spectrum, giving it benign electromagnetic interference properties with respect to other signals.

Some COFDM systems use some of the sub carriers to carry pilot signals, which are used for frequency stabilisation, as frequency shifts during the transmission using the main modulation/demodulation process transform into bit errors in the decoded data.

In wide area broadcasting, because effectively the bit rate is slowed down on each sub-carrier, receivers can benefit from receiving signals from several spatially dispersed transmitters simultaneously, so that instead of transmitters interfering with each other, they can actually reinforce coverage over a wide area. This is very beneficial in many countries, as it permits the operation of national single frequency networks, and avoids the replication of program content on different carrier frequencies which is necessary with FM or other forms of radio broadcasting. Such single frequency networks utilise the available spectrum more effectively than existing analogue radio networks.

However, OFDM suffers from time-variations in the channel, or presence of a carrier frequency offset. Moreover, due to the mathematical FFT operation applied at the transmitter, the signal also tends to have a high peak-to-average ratio.

ADSL

OFDM is used in ADSL connections that follow the G.DMT (ITU G.922.1) standard. (Annex A refers to ADSL-over-POTS).

The fact that COFDM is not wont to interfere easily with other signals is the main reason it is frequently used in applications such as ADSL modems in which existing copper wires are used to achieve high-speed data connections. The lack of interference means no wires need to be replaced (otherwise it would be cheaper to replace them with fiber). However, DSL cannot be used on every copper pair, interference may become significant if more than 25% of phone lines coming into a Central Office are used for DSL.

Wireless LAN

COFDM is also now being used in some wireless LAN applications. Experimental users have even hooked up commercial off-the-shelf ADSL equipment to radio transceivers which simply shift the bands used to the radio frequencies the user has licensed. Wireless Ethernet HYPERLAN-2 is based on COFDM.

DAB and DVB

COFDM is also now widely used in Europe and elsewhere where the Eureka 147 Digital Audio Broadcast standard has been adopted for digital radio broadcasting, and also for digital TV in the DVB digital TV standard. One of the major benefits provided by COFDM is that it renders radio broadcasts relatively immune to multipath distortion, and signal fading due to atmospheric conditions, or passing aircraft. The USA has rejected several proposals to adopt COFDM for its digital radio services, and has instead opted for 8VSB (vestigial sideband modulation) operation. In 2001, a technical report compiled by the COFDM Technical Group concluded that COFDM did not offer any significant advantages over 8VSB.

The debate over 8VSB vs COFDM modulation is still ongoing. Proponents of COFDM argue that it resists multipath far better than 8VSB. Early 8VSB DTV (digital television) receivers often had difficulty receiving a signal in urban environments. However, newer 8VSB receivers are far better at dealing with multipath. Moreover, 8VSB modulation requires less power to transmit a signal the same distance. In less-populated areas, 8VSB often pulls ahead of COFDM because of this. In urban areas, however, COFDM still offers better reception than 8VSB.

• Chang, R. W. (1966). Synthesis of band-limited orthogonal signals for multi-channel data transmission, Bell Systems Technical Journal (46), 1775-1796.
• Chang, R. W. & and Gibbey, R. A. (1968). A theoretical study of performance of an orthogonal multiplexing data transmission scheme, IEEE Transactions on Communications Technology (16) (4), 529-540.
• Saltzberg, B. R. (1967). Performance of an efficient parallel data transmission system, IEEE Transactions on Communications Technology (15) (6), 805-811.